Oceanbox Buying Resources
Container Condition and Acceptance Checklist
Compare container condition descriptions, unit evidence and examination questions before agreeing acceptance. Download a buyer checklist.
Start with the intended use and written acceptance criteria
Tell the seller whether you intend to transport cargo, store goods or modify the container. Agree the exact condition, door arrangement, acceptable defects and evidence you need before placing the order. Commercial labels describe an offer; they do not replace a unit-specific assessment or your carrier’s requirements.
Keep the location, type code and quantity basis on the written offer. For Duocon, confirm assembled sets versus separated units. For side-opening equipment, confirm the actual clear openings and door swing for the supplied batch.
One-trip, cargo-worthy, wind-and-watertight and as-is
- One-trip: commonly describes equipment used for an initial cargo journey. Ask what cosmetic wear and repairs are acceptable; the label does not mean unused or blemish-free.
- Cargo-worthy: ask which inspection criteria and supporting documents apply to the actual unit. Do not treat the label as a carrier’s acceptance or a current examination certificate.
- Wind-and-watertight: ask how weather resistance was checked and what floor, seal and door condition is included. This description alone does not establish suitability for international cargo transport.
- As-is: agree the known defects and inspection opportunity, and clarify any remedy or exclusion in the written terms.
These are questions for comparing descriptions, not a claim that every Oceanbox listing is offered in each category. Use the condition stated in the actual offer.
Which photographs and evidence should I request?
Ask whether the pictures show the offered units or a representative example. A useful evidence request covers the floor, interior walls and roof, outside panels, door seals, hinges and locking gear, and any known repairs. Ask about moisture, odor or contamination concerns relevant to your goods. Match equipment identification privately to the transaction documents; a picture of a similar box is not proof of the supplied unit.
Request measured cargo and opening clearances when they matter. Do not infer a batch’s dimensions or carrying capacity from a marketing type name. Arrange any necessary physical assessment with a competent party rather than treating photographs as a structural survey.
Turn a photo bundle into a traceable evidence request
A collection of clear pictures can still leave you unsure which unit is being offered, when it was photographed or which defect was discussed. Start an evidence log for each offered unit or explicitly identified batch. Keep the actual equipment identification and transaction references in your private correspondence; do not publish a completed log.
- Identify the evidence. Ask whether each image shows the actual offered unit or a representative example. Record the seller’s stated capture date, the image or file reference and how it is matched to the offered equipment. A filename or an email’s received date alone does not establish when the picture was taken.
- Record what is visible and what is missing. Describe the location and view, then ask a specific follow-up. “No view supplied” and “not assessed” are useful entries; neither should become “no defect.” Use an overall view and a close-up together when discussing an area of concern.
- Keep the response beside the question. Note the answer, any additional evidence and the written action agreed for that exact issue. Mark an item resolved only when the agreed response is recorded. This organizes a buying discussion; it does not certify the equipment.
Representative photographs leave an actual-unit evidence gap. If the final unit is selected later, agree when its evidence and any inspection will be available, and how a mismatch will be addressed before dispatch. Do not silently carry an earlier photo approval over to a substitute unit.
Six photo groups, with a question for each
Use this request list to make missing views explicit. Ask the seller or depot for safely obtainable evidence; do not climb onto equipment, enter unsafe areas or operate doors yourself to complete a photo list. Access and any physical assessment belong with the responsible operator or competent assessor.
| View to request | What to connect to the offer | Follow-up if unclear |
|---|---|---|
| 1. Overall exterior | Both long sides, ends and the roof where safely obtainable; identify which views belong to the offered unit. | Which surfaces are not shown? Is a marked area damage, a repair or a reflection? |
| 2. Interior surfaces | Floor, walls and interior roof, with the position of any stain, patch or visible opening. | What is the explanation and is a closer view or physical assessment available? |
| 3. Doors and seals | Open and closed views, seals, hinges and locking gear for the offered door arrangement. | Has operation been checked? A still image does not demonstrate opening, closing or sealing performance. |
| 4. Known damage or repairs | An overall location view and a labeled close-up for each disclosed issue. | What work, if any, is proposed, who will confirm it and what evidence will follow? |
| 5. Identification and plate | Privately match readable equipment identification and relevant plate/examination information to the offer. | Does the identification match? What current examination information is still needed for the intended use? |
| 6. Use-specific evidence | Actual opening measurements or other batch details needed for the goods and loading plan. | What cannot be established by pictures, including odor or contamination concerns and operating clearances? |
A bright interior image is not a leak test, a door photograph is not an operating test, and a plate photograph is not a current condition survey. Agree the appropriate assessment and evidence for your use. For side access, use the separate cargo and opening measurement brief.
Record an exception before agreeing the next step
For each unanswered question or mismatch, record five things: the agreed requirement; the observation and image reference; the missing answer; the proposed action and responsible party; and the written resolution or remaining question. Add the review date and whether the evidence concerns the actual offered unit. Keep “question answered,” “condition accepted under agreed terms” and “released for collection” as separate records.
Illustrative entry: an unclear floor mark
Observation: “Photo P-04 shows a dark area near the door end; its cause is not established.” Question: “Please provide a location view, a close-up and the explanation for this area against our agreed floor condition.” Status: “Awaiting response; not assessed.”
This invented entry shows how to frame a question. It is not an Oceanbox unit, a diagnosis, an acceptance decision or a promise of cleaning, repair, replacement or refund. Any remedy must be agreed in the actual written terms.
If the offered equipment changes, reopen the affected evidence entries. If a question remains material to your agreed acceptance criteria, confirm the next inspection or decision step with the seller before arranging collection. A completed log does not reserve equipment, confirm payment, authorize release or approve transport.
The text download is a blank offline worksheet. Fill and share it only through the private channel you choose; this page has no evidence-upload form.
Does a CSC plate prove the current condition?
A safety approval plate is part of the international container-safety framework. IMO describes approval, inspection and ongoing maintenance under the International Convention for Safe Containers. A plate photograph does not by itself establish that today’s offered unit is undamaged or suitable for your shipment.
The BIC combined data plate explanation distinguishes approval information from ongoing condition and examination. For cargo transport, request the relevant plate and examination information and confirm what your carrier requires. Storage or modification requirements should be agreed separately; this buyer guide is not a survey certificate or shipping approval.
What is the difference between PES and ACEP?
BIC describes two approved examination arrangements. Under the periodic examination scheme (PES), the first examination is due before the fifth anniversary of manufacture, with later intervals no longer than 30 months and a next-examination-date marking. ACEP is an approved continuous examination program, identified by its scheme number, with regular inspections during operation.
Check the arrangements that will apply to the supplied unit and its use after transfer. An old operator’s marking should not be assumed to settle the buyer’s future examination responsibility. Refer to BIC’s examination-scheme guidance and confirm the relevant documentation and responsible party in writing.
For a China-to-North-America lease, use the existing carrier-acceptance checklist or its Chinese version to prepare questions for the actual carrier. The checklist generates a local draft; it does not upload documents or confirm acceptance.
Agree what happens if the unit does not match
Before dispatch, establish when the inspection takes place, who assesses conformity, what substitutions require approval, and how a disclosed mismatch is handled. Ask whether the agreed remedy is repair, replacement or another written arrangement. Do not assume a general return policy, warranty period or free repair where none is stated.
Confirm the selling-price currency and all relevant charges separately. Readiness, release instructions and depot arrangements require confirmation before a truck is sent; an elapsed ETA or Pickup label does not settle acceptance or permission to collect.
Download the buyer acceptance checklist
The printable checklist keeps equipment evidence, transport examination questions and commercial acceptance in one place. It contains blank checks and public reference links, with no inventory ownership marks, supplier details or private transaction data.
To prepare a specific requirement, use the container request worksheet. Browse the public inventory, then request confirmation for the batch being supplied.
Technical references and scope
Technical examination statements above refer to IMO’s CSC overview, BIC’s combined plate explanation and BIC’s PES and ACEP guidance. The purchase questions and checklist are Oceanbox buyer resources; those organizations have not endorsed Oceanbox or this guide.
Photo evidence and exception-log sections added 28 October 2026; plate and maintenance context checked against BIC and IMO the same day. Final condition, specification, availability, inspection and acceptance terms depend on the actual written offer.
