Oceanbox Buyer Resources
Container dimensions and specification reference
Start with a clearly sourced reference, then confirm the exact configuration and batch before choosing equipment.
Reference examples and the equipment actually offered
The four examples below come from Hapag-Lloyd’s published fleet pages, checked on November 8, 2026. They describe conventional dry equipment in that fleet and vary by manufacturer. They are not specifications, load approvals or availability claims for Oceanbox equipment. Ask for the offered unit or batch drawing and markings before relying on a close fit or rating.
Nominal lengths such as 20ft or 40ft are size classes. Outside dimensions and footprint must be checked on the applicable drawing; they are not the usable inside space or the clear loading opening. Dimensions below are length × width × height; openings are width × height. Metric and imperial figures follow the source’s published rounding.
20ft standard dry
Related Oceanbox inquiry code: 20GP. Confirm the offered configuration.
- Inside dimensions, mm
- 5,900 × 2,352 × 2,395
- Inside dimensions, ft/in
- 19′ 4¼″ × 7′ 8⅝″ × 7′ 10¼″
- Clear end-door opening, mm
- 2,340 × 2,292
- Clear end-door opening, ft/in
- 7′ 8⅛″ × 7′ 6¼″
- Capacity, m³ / ft³
- 33.2 / 1,172
- Tare, kg / lb
- 2,350 / 5,181
- Maximum gross mass, kg / lb
- 30,480 / 67,197
- Maximum payload, kg / lb
- 28,130 / 62,016
40ft standard dry
Related Oceanbox inquiry code: 40GP. Confirm the offered configuration.
- Inside dimensions, mm
- 12,032 × 2,352 × 2,395
- Inside dimensions, ft/in
- 39′ 5⅝″ × 7′ 8⅝″ × 7′ 10¼″
- Clear end-door opening, mm
- 2,340 × 2,292
- Clear end-door opening, ft/in
- 7′ 8⅛″ × 7′ 6¼″
- Capacity, m³ / ft³
- 67.7 / 2,390
- Tare, kg / lb
- 3,750 / 8,267
- Maximum gross mass, kg / lb
- 32,500 / 71,650
- Maximum payload, kg / lb
- 28,750 / 63,383
40ft high cube dry
Related Oceanbox inquiry code: 40HC. Confirm the offered configuration.
- Inside dimensions, mm
- 12,032 × 2,350 × 2,700
- Inside dimensions, ft/in
- 39′ 5⅝″ × 7′ 8½″ × 8′ 10¼″
- Clear end-door opening, mm
- 2,340 × 2,597
- Clear end-door opening, ft/in
- 7′ 8⅛″ × 8′ 6¼″
- Capacity, m³ / ft³
- 76.3 / 2,694
- Tare, kg / lb
- 3,900 / 8,598
- Maximum gross mass, kg / lb
- 32,500 / 71,650
- Maximum payload, kg / lb
- 28,600 / 63,052
45ft high cube dry
Related Oceanbox inquiry code: 45HC. Confirm the offered configuration.
- Inside dimensions, mm
- 13,556 × 2,352 × 2,700
- Inside dimensions, ft/in
- 44′ 5⅝″ × 7′ 8⅝″ × 8′ 10¼″
- Clear end-door opening, mm
- 2,340 × 2,597
- Clear end-door opening, ft/in
- 7′ 8⅛″ × 8′ 6¼″
- Capacity, m³ / ft³
- 86.0 / 3,037
- Tare, kg / lb
- 4,800 / 10,552
- Maximum gross mass, kg / lb
- 32,500 / 71,650
- Maximum payload, kg / lb
- 27,700 / 61,067
Download the reference values and source URLs (JSON).
The 40HC source table lists an inside width of 2,350 mm, while its illustration displays 2,352 mm. This reference uses the table value and keeps the discrepancy visible; obtain the actual drawing for a clearance-sensitive request. The 40GP source prints tare as “3.750” in its kilogram row; it is shown here as 3,750 kg, consistent with the same source’s pound figure and gross/payload values.
Special doors and Duocon need configuration-specific data
Do not transfer the dry-container examples above to a 4-door side-opening, full-side-opening, double-door or Duocon offer. Posts, frames, door hardware, weight and usable openings must be confirmed for that configuration.
- 40HCOS-4D: existing batch reference specifications and drawing checks
- Full-side opening versus 4-door side-opening
- 20ft side access: exact codes and measurement converter
- Double-door: separate end-opening checks
- Duocon: assembled, collected and resulting-unit basis
- 20HC, 40GP and 45HC: length and height selection
Where a verified numeric specification for the offered configuration is unavailable, request it rather than filling the gap with another fleet’s values.
Compare two real offers
Use the common specification comparison fields and download the blank two-offer sheet. Record the exact code, batch or unit applicability, document date, original units and unresolved differences.
